LLumar Paint Protection Film 

LLumar Paint Protection Film      ▶  AUTOTONESANA TINT SERVICE

▶     http://www.autologutonesana.lv/

LLumar PPF autologutonesana

LLumar Paint Protection Film is an 8 mil (200 micron) urethane film designed to protect automobile finishes from
chips and scratches from stones, road debris and winter salt and sand. LLumar Paint Protection film utilizes a dual
layer construction, with the top layer providing a long lasting harder coat to preserve the high gloss finish of the film
and the appearance of the automobile. The bottom layer, along with a proprietary adhesive system, is designed to
provide a second layer of protection and a highly conformable and easy to install film.
Technical Data Sheet – September 2011
Paint Protection Film
Product Roll Length Widths 12″ 18″ 24″ 30″ 36″ 48″ 60″
Paint Protection Film 50′ • •
Paint Protection Film 100′ •••••
General Description
Roll Sizes Offered
Product Construction
Urethane Film Clear and non-yellowing
Adhesive High Performance Adhesive
Urethane 8 mil (200 micron)
Adhesive 2 mil (50 micron)
Liner 5 mil (125 micron)
Liner Easy release silicone coated polyester
Physical Properties
2 mil mounting adhesive
5 mil release liner
1 mil clear urethane hard layer
7 mil clear urethane soft layer
Performance Test Test Condition Results
Tensile strength (psi) ASTM D 412 5000
Elongation (%) ASTM D 412 550%
Peel Adhesion 72 hrs @ RT 800 N/m
180 degree (N/m) Humidity – 168 hrs @ 95% RH 800 N/m
Heat Age – 168 hrs @ 70°C 800 N/m
High Temp – 1 hr @93°C 800 N/m
Environmental Weathering Cycle 800 N/m
Weathering Humidity – 168 hrs @ 95% RH NDE*
Tests Heat Age – 168 hrs @ 70°C NDE*
High Temp – 1 hr @ 93°C NDE*
Environmental Cycle – 2 NDE*
Corrosion – 24 hr Salt Spray NDE*
Film Durability – Gravelometer NDE*
Xenon Arc – 1250 KJ/m^2 NDE*
Florida – 350,000 langleys 45º Pass
Arizona – 350,000 Langleys 5º Pass
Outdoor Exposure 24 hr in 40º C water, 1 hr @ RT NDE*
Chemical Isopropyl Alcohol NDE*
Resistance VM&P Naphtha NDE*
Paint Cleaning Solvent NDE*
Fuel Resistance – Gasoline Dip NDE*
Chipping Resistance Gravelometer (SAE J400) Pass
Wear Resistance Taber Abrasion Test No wear through
Shrinkage 30 min. @ 120 degree C <1%
*No Detrimental Effects
Technical Data Sheet – September 2011
One year from date of receipt by customer when stored at 40°F – 90°F (4°C – 32°C) @ 0-90% relative
humidity. Optimum recommended storage conditions are 75°F (24°C) @ 50% relative humidity.
Questions? (800) 255-8627 • http://www.llumar.com
©2011 Solutia Inc., St. Louis, Missouri, USA. All rights reserved. LLumar and LLumar logo are trademarks of Solutia Inc. As used
herein, ® denotes registered trademark status in the U.S. only. Visual renderings are for illustrative purposes only.
Paint Protection Film
Technical Data
Shelf Life